The room can be designed by customer sites, product characteristics, blasting requirement and produce situation.
The operating plane can maximize meet customer demands. We can increase the transmission unit according to the customer's product type,
to achieve automated production line. Fine sand abrasive materials can be used for surface treatment of precision workpieces.
The system is easy to operate and reliable, and does not produce flowing dust during running,
greatly reduced the environmental pollution and health hazards of operators. For the recycling use of abrasive blasting liquid,
it leads to the result of less abrasive consumption and less nozzle wear, makes the system reliable and economic.
Adding antiseptic liquid to grinding fluid(add the environment friendly corrosion inhibitor with the concentration of 3% which is developed by our company)
can make the cleaning iron workpieces without rust in 7 days.
The liquid wet sandblasting room is composed of room body, mainframe, spray gun, sand storage cabin, grinding fluid pump,
washer pump, pneumatic system, spray gun sand system, electric system, etc.
The exterior size of the sandblasting room is 197 by 236 by 118 inches/236 by 394by 138 inches/ 236 by 591 by 157inches
(can be tailored according to customer requirements )
l 1. The facility does not produce flowing dust during running, greatly reduced the environmental pollution and health hazards of operators.
l 2. The operating plane can reach 236 by 236 inches, which is suitable for the blasting of large workpiece.
l 3. Adding antiseptic liquid to grinding fluid
(add the environment friendly corrosion inhibitor with the concentration of 2% which is developed by our company)
can make the cleaning iron workpieces without rust in 3 days.
l 4. It can be designed by the user's site and production conditions, maximize meets customer demands.
l 5. Specializing in the production of liquid pump, spray gun, sand blasting hose and other parts, to ensure reliable performance.
l 6. Suitable for various materials and abrasive granularity.
l 7. Less abrasive consumption.
l 8. Simple maintenance
l 1.Applicable to liquid sand blasting process.
l 2.The cleaning quality of the oxide skin, residual salt and welding slag from heat treatment parts,
welding parts, castings, forgings can reach Sa3 level.
l 3.Clean the micro burr, surface residues on the machine parts.
l 4.For the pre-treatment of the surface of workpiece before coating and planting,
the active surface can be obtained and the adhesion of coating and planting can be improved.
l 5.Suitable for the polishing processing of workpiece which is high precision, small roughness Ra value, complex shape, other method is difficult to complete.
l 6.Used for improving the physical and mechanical properties of the surface of the workpiece,
such as changing the state of the surface stress and improving the lubrication conditions of the mating parts.
l 7.Used for surface strengthening treatment to eliminate stress.
l 8.Used for the renovation of the old parts.
l 9.Used for mold cleaning, does not hurt the mold surface, to ensure mold accuracy and improve product quality.