The valve is used to regulate the sand on sand blasting machine or sand blasting tank.Mainly divided into two kinds of pneumatic and manual.
The pneumatic valve is automatically opened and closed by the gas controlling.
Sand control valve is the core component of the host of the sand blasting machine, which improves the service life of the sand valve.
The valve is accuracy, and wear resistance
The operators use electric controlled switch send control signal to intake valve and closed abrasive valve,
the strong spring is compressed in abrasive valve under the action of compressed air, flow control tube open and start sand blasting.
Once the signal disappears, the strong spring close the abrasive valve immediately cutting off the abrasive supply.
The valve can be adjusted according to the abrasive flow of abrasive blasting operation, it controls flow accurately, and the operation is simple.
Can be used with spray steel shot, steel and other large material.
The valve is suitable for all kinds of abrasive and abrasive tools. It uses a Polyurethane sleeve to protect the valve core,
and simple design make it easier to load and unload its parts.
Using the valve, make the valve body stronger and it adjusts the maximum high degree of abrasive flow,
constant flow of abrasive become precision. This valve substantial reduces the abrasive wear, and reduces the cost.