It is a manual feeding equipment with a rubber track. The effective size of machine is Φ24 by 35 inch.
The maximum transfer of machine(shot blast capacity) is ≤ 441 lb/min. The maximum bearing weight of each workpiece is 22 lb.
The total power of the machine is 12.6 Kw.
The machine sets the mainframe and the dust removal equipment in one(can be installed separately in accordance with the requirements),
requires less covered area, the machine is easy to operate and reliable, and with characteristics of high efficiency,
is suitable for shot blasting of medium or large amount of workpieces(Models 326 or 400,handling capacity of steel parts per hour is 1 ton or so:
handle about 200 kg every 8-15 minutes.note:except for unit density part).
l 1.Cleaning and polishing for die casting, precision casting, precision forging.
l 2.Removal of the surface oxide on heat treatment parts, castings, forgings.
l 3.The strengthening of the spring, derusting and pretreatment for fasteners.
Put the workpiece into the rubber track shot blasting cleaning work are, and press the running button,
then the room door will pneumatic close and start blasting cleaning. Track running forward, workpiece tumbling constantly,
efficient and powerful shot blasting machine will projectile the ball blast high-speed to the surface of rolling workpiece,
so as to the workpiece can be completely evenly clear. Steel shot flow through the sliding hole into the spiral conveyor,
and send the steel shot to bucket lifting machine then the separator. After being separated, the steel shot will be stored stand by.
After shot blasting, the shot room door opens automatically, the track reverses, then the workpiece will be unloading out.
The machine is using the high speed rotary impeller throw projectile to the continuous turning workpiece in the track ,
to achieve the purpose of cleaning up the workpiece. Suitable for sand cleaning, rust cleaning,
oxide skin cleaning and surface strengthening in various industries of small-sized castings, forgings, stamping parts, gears, springs, and other
workpiece.Comprehended technology home and abroad, we design and develop this new product. It is a equipment with high cleaning efficiency,
Compact structure,low noise, better systematic.
l 1.The machine is using the high speed rotary impeller throw projectile to the continuous turning workpiece in the track ,
to achieve the purpose of cleaning up the workpiece.
l 2.The machine is equipped with cantilever centrifugal impeller, with the functions of long-lived and simple mechanism.
l 3.Using BE type separator has effects of excellent separation and productivity, it can improve the blasting efficiency.
l 4.The system uses bag type dedusting and vibration cleaning, makes the dust emission concentration is lower than the national standards,
greatly improved the working environment of the operator.
l 5.Using the abrasive rubber tracks, reduces the collision and damage of workpieces, and the noise of the machine
(Note: the track is the authentic track made in Laoshan, Shandong, which can be used over 2 years without sharp or blade products).